Sabtu, 22 April 2017

All HTC One M9 Secret Codes

These are list of All HTC One M9 secrete codes that can unlock some hidden features and settings, allowing users to navigate and access hidden features on thier mobile device using the short codes.


HTC M9 (HTC ONE M9) SPECS
Operating System Android 5.0 (Lollipop), upgradable to 7.0 (Nougat)
Chipset Qualcomm MSM8994 Snapdragon 810
Processor CPU: Octa-core (4x1.5 GHz Cortex-A53 & 4x2.0 GHz Cortex-A57), GPU: Adreno 430
Storage RAM: 3GB, ROM: 32GB, up to 256GB
Dimension 144.6 x 69.7 x 9.6 mm
Connectivity
Wi-Fi: 802.11/b/g/n, 2G: GSM, 3G: HSDPA, EVDO, 4G: LTE, - Bluetooth v4.1 A2DP, aptX
Camera
Rear Camera: 20MP, Front Camera: 4MP
Battery Capacity 2840mAh

Code Action:

  • To Check Show HTC info menu: *#*#4636#*#*
  • To Launch Google Talk service monitor: *#*#8255#*#*
  • To Check EPST/PRL-PRL Settings: ##775#
  • To Check EPST-Status Menu: ##786#
  • To Check EPST-Data Programming Menu: ##3282#
  • To Check EPST/A-Key-Data A key menu: ##2539#
  • To Check EPST/P_Rev-Protocol Revision: ##7738#
  • To Check Test GPRS Information: *#*#1472365#*#*
  • To Check Test Another GPRS Information: *#*#1575#*#*
  • To Check PDA, Phone, H/W, RFCallDate Information: *#*#4986*2650468#*#*
  • To Check PDA and Phone Information: *#*#1234#*#*
  • To Check FTA SW Version Information: *#*#1111#*#*
  • To Check FTA HW Version  FTA HW Version: *#*#2222#*#*
  • To Check EPST/Vocoder-Unsure: ##8626337#
  • To Check Debug-Debug Menu: ##33284#
  • To Diagnostic Connect to phone in diag mode: ##3424#
  • To Reset the GPS: ##4772579#
  • To Factoy Settings: ##72786#
  • To Enable TTY: ##889#
  • To Test: *#*#3424#*#*
  • To Open SuperSu: *#*#1234#*#*
  • To Check test Vibration Backlight Information: *#*#0842#*#*
  • To Check Information: *#*#7780#*#*
  • To Check and Test your Mobile phone Bluetooth: *#*#232331#*#*
  • To Check Mobile phone Bluetooth device address: *#*#232337#*#
  • To Check full PDA, Phone, CSC, Build Time, Changelist no Info: *#*#44336#*#*
  • To Check Packet Loopback Information: *#*#0283#*#*
  • To Check LCD Information use: *#*#0*#*#*
  • To Check RAM Information: *#*#3264#*#*
  • To Check  Screen version Information: *#*#2663#*#*
  • To Check  Touch screen test Information: *#*#2664#*#*
  • To Check proximity sensor test: Information: *#*#0588#*#*
  • To Check Melody Test Information: *#*#0673#*#* OR *#*#0289#*#*
  • To Check WiFi MAC address Information: *#*#232338#*#*


Please Leave a comment after using this Tutorials
Report if you cannot do this.

All Apple iPhone Secret Codes

These are list of Apple iPhone secrete codes that can unlock some hidden features and settings, allowing users to do anything from enhancing their call quality to checking their mobile balance.


All Apple iPhone Secret Codes

Code Action:

*#61# - and tap Call To verify the number of unanswered calls
*#62# - and tap Call Use to verify the number for call forwarding
*#06# -To display the IMEI Number of the mobile
*777# -and tap Call To display the account balance information for prepaid iPhone
*225# -and tap Call To display the account balance information for Postpaid iPhone
*#67# -and tap Call To display the number for call forwarding when the iPhone is busy
*3001# - 12345#*- To display many of the inner settings of your iPhone
*#21# -To verify the call forwarding is enabled or disabled
*646# -and tap Call To display the Post-paid minute balance
*#33# -and tap Call To Check for call control bars.

> Enter field mode
3001#12345# and tap Call
Field mode reveals many of the inner settings of your iphone specially up-to-date network and cell information.

*#30# and tap Call. Calling line presentation check.
This displays whether you have enabled or disabled the presentation of the calling line, presumably the number of the party placing the call.

*#76# and tap Call. Check whether the connected line presentation is enabled or not.
State whether the connected line presentation is enabled or disabled.
Presumably similar to the calling line presentation.

*#43# and tap Call. Determine if call waiting is enabled
Displays call waiting status for voice, data, fax, sms, sync data, async data, packet access and pad access. Each item is either enabled or disabled.

*#61# and tap Call.
Check the number for unanswered calls.
Who the number for voice call forwarding when a call is answered.
Also show the options for data, fax, sms, sync, async, packet access and pad access

*#62# and tap Call.
Check the number for call forwarding if no service is available. Just like the previous, except for no-service rather than no-answer situations.

*#67# and tap Call.
Check the number for call forwarding when the iPhone is busy.
And again, but for when the iPhone is busy.

*#33# - and tap Call. Check for call
control bars Here you will find all GSM-Codes/Secret-Code, for the iPhone are relevant.

*3001#12345#* - To get your access to the field test mode of iPhone.

*#30# - Thus, you can check whether the caller identification (Clip-function) in the iPhone is active.

*#43# - Call Waiting Status
*43# - Activate a waiting
#43# - Deactivate waiting

Change PIN1: **04* old PIN * new
PIN * new PIN #

Change PIN2: **042*old PIN * new
PIN * new PIN #

*#746025625# - SIM Clock Stop Mode
Whether your SIM card the SIM Clock Stop mode supported, you can find out with this code. The iPhone will then idle at the SIM card, is no calls, etc., all activities on the SIM card.
This has a positive effect on power consumption and prolongs battery life.

*3370# EFR mode
Enhanced Full Rate improves voice quality, but slightly reduced battery life.
#3370# - ERF OFF mode
*4720# - Half Rate (HFR) on
Opposite of ERA.
#4720# - Half Rate (HFR) off
*21# - Call divert a
#21# - Call divert from
**21* -destination number #
number programmed
###21 deletes the call transfer is complete.
*#21# Call Forwarding Overview
**61* destination number ** (Time
5 to 30 seconds) # divert after 5 to
30 seconds to ring
*61# - Activate divert
#61# - Call divert Disabled
##61# - Deletes Diversion
*#61# - Call divert status
**62* destination number #
redirection in unattainability
*62# - Turning
#62# - Off
##62# - Clear
*#62# - Status
**67* destination number # - for Divert if busy
*67# - Turning
#67# - Off
##67# - Clear
*#67# - Status
*31# - phone number is transmitted
#31# - phone number is not transmitted
*#5005*86# Are you the code, it displays the current mailbox settings.
*5005*86*# xxxxx Combox mail button on the available
(xxxxx = mailbox number)
*646# - minutes consumption control
*135# - Display Own Phone Number
*33* - barring code # Outgoing calls to block the lock code to inquire about her please contact your network operator.
*#33 - Unlock
*#33# - Status
*331* - barring code # Outgoing calls abroad to block the lock code to inquire about her please contact your network operator.
#331* - barring code # lift blockade
*#331# - status
*#5005*7672# SMS - center check Current number of the SMS Center (SMSC) to find out. Each SMSC
according to variable cost
*5005*7672*xxxxxxx # - SMS Center reactivate
(xxxxxxx = SMS center number)



Please Leave a comment after using this Tutorials
Report if you cannot do this.

DOWNLOAD OPPO N1 MINI N5111 STOCK ROM

Below is the direct link to download the Oppo N1 Mini N5111 Stock ROM (Firmware).

DOWNLOAD OPPO N1 MINI N5111 STOCK ROM

Note:
[*] Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader, will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

OPPO N1 MINI N5111 SPECS
Operating System Android v4.3 (Jelly Bean)
Chipset Qualcomm Snapdragon 400
Processor CPU: Quad-core 1.6 GHz Cortex-A7, GPU: Adreno 320
Storage RAM: 2GB, ROM: 16GB, up to 256GB
Dimension 148.4 x 72.2 x 9.2 mm
Connectivity
Wi-Fi: 802.11/b/g/n, 2G: GSM, 3G: HSDPA, 4G: LTE, - Bluetooth v4.0, A2DP
Camera
Rear Camera: 13MP, Front Camera: 13MP
Battery Capacity 2140mAh

OPPO N1 MINI N5111 STOCK ROM

Oppo_N5111_N1_Mini_N5116_11_A.13_160105

DOWNLOAD ROM

How To Flash

STEP 1. Download & extract the Stock ROM (Firmware) on your computer.
STEP 2. Install the USB Drivers (skip this step if drivers are already installed).
STEP 3. After extracting you will find the Firmware, Driver and instruction manual.
STEP 4. Follow the manual to flash the firmware on your device.



Important Notes:

[*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on).

==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here

[*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens.

[*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.



Please Leave a comment after using this ROM
Report it you cannot download this file.


Any donation to support this site is highly appreciated!

Enter Amount (₦)



Click here to make donations using U$D

DOWNLOAD OPPO N1 STOCK ROM

Below is the direct link to download the Oppo N1 Stock ROM (Firmware).

DOWNLOAD OPPO N1 STOCK ROM

Note:
[*] Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader, will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

OPPO N1 SPECS
Operating System Android v4.3 (Jelly Bean)
Chipset Qualcomm Snapdragon 600
Processor CPU: Quad-core 1.7 GHz Krait 300, GPU: Adreno 320
Storage RAM: 2GB, ROM: 16/32GB, up to 256GB
Dimension 170.7 x 82.6 x 9 mm
Connectivity
Wi-Fi: 802.11/b/g/n, 2G: GSM, 3G: HSDPA, - Bluetooth v4.0, A2DP
Camera
Rear Camera: 13MP, Front Camera: 5MP
Battery Capacity 3610mAh

OPPO N1 STOCK ROM

Oppo_N1_12_A.13_150128_SVN5986

DOWNLOAD ROM

How To Flash

STEP 1. Download & extract the Stock ROM (Firmware) on your computer.
STEP 2. Install the USB Drivers (skip this step if drivers are already installed).
STEP 3. After extracting you will find the Firmware, Driver and instruction manual.
STEP 4. Follow the manual to flash the firmware on your device.



Important Notes:

[*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on).

==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here

[*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens.

[*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.



Please Leave a comment after using this ROM
Report it you cannot download this file.


Any donation to support this site is highly appreciated!

Enter Amount (₦)



Click here to make donations using U$D

Jumat, 21 April 2017

DOWNLOAD OPPO FIND 7A STOCK ROM

Below is the direct link to download the Oppo Find 7A Stock ROM (Firmware).

DOWNLOAD OPPO FIND 7A STOCK ROM

Note:
[*] Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader, will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

OPPO FIND 7A SPECS
Operating System Android v4.3 (Jelly Bean)
Chipset Qualcomm MSM8974AB Snapdragon 801
Processor CPU: Quad-core 2.3 GHz Krait 400, GPU: Adreno 330
Storage RAM: 2GB, ROM: 16GB, up to 256GB
Dimension 152.6 x 75 x 9.2 mm
Connectivity
Wi-Fi: 802.11/b/g/n, 2G: GSM, 3G: HSDPA, 4G: LTE, - Bluetooth v4.0, A2DP
Camera
Rear Camera: 13MP, Front Camera: 5MP
Battery Capacity 2800mAh

OPPO FIND 7A STOCK ROM

Oppo_Find_7_ Find_7A_WX_12_A.15_160218

DOWNLOAD ROM

How To Flash

STEP 1. Download & extract the Stock ROM (Firmware) on your computer.
STEP 2. Install the USB Drivers (skip this step if drivers are already installed).
STEP 3. After extracting you will find the Firmware, Driver and instruction manual.
STEP 4. Follow the manual to flash the firmware on your device.



Important Notes:

[*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on).

==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here

[*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens.

[*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.



Please Leave a comment after using this ROM
Report it you cannot download this file.


Any donation to support this site is highly appreciated!

Enter Amount (₦)



Click here to make donations using U$D

Download All in One RomShillzz 1249 Fonts Megapack 2017

All in one RomShillzz 1249 Fonts Megapack 2017 is a package of free writing styles. Below is the direct link to download the All in One RomShillzz 1249 Fonts 2017 Megapack.

Screenshots:





Please Leave a comment after using this Fonts Megapack
Report it you cannot download this file.


DOWNLOAD OPPO FIND 7 STOCK ROM

Below is the direct link to download the Oppo Find 7 Stock ROM (Firmware).

DOWNLOAD OPPO FIND 7 STOCK ROM

Note:
[*] Follow the instructions on how to flash this device carefully, I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because flashing a wrong preloader, will make the device completely dead (can't power on, can't charge and will not be detected by a computer).

OPPO FIND 7 SPECS
Operating System Android v4.3 (Jelly Bean)
Chipset Qualcomm MSM8974AC Snapdragon 801
Processor CPU: Quad-core 2.5 GHz Krait 400, GPU: Adreno 330
Storage RAM: 3GB, ROM: 32GB, up to 256GB
Dimension 152.6 x 75 x 9.2 mm
Connectivity
Wi-Fi: 802.11/b/g/n, 2G: GSM, 3G: HSDPA, 4G: LTE, - Bluetooth v4.0, A2DP
Camera
Rear Camera: 13MP, Front Camera: 5MP
Battery Capacity 3000mAh

OPPO FIND 7 STOCK ROM

Oppo_Find_7_ Find_7A_WX_12_A.15_160218

DOWNLOAD ROM

How To Flash

STEP 1. Download & extract the Stock ROM (Firmware) on your computer.
STEP 2. Install the USB Drivers (skip this step if drivers are already installed).
STEP 3. After extracting you will find the Firmware, Driver and instruction manual.
STEP 4. Follow the manual to flash the firmware on your device.



Important Notes:

[*] It is always advisable to backup the Stock ROM (Firmware) of the device you are about to flash unless the device is completely dead (can't power on).

==>> Learn how to backup Stock ROMs (Firmware's) Before flashing from here

[*] Take a Backup of your personal data before flashing or installing any Stock ROM (Firmware) or Flash file on your smartphone. As this helps you to recover the personal data when ever any thing wrong happens.

[*] Make sure you read & follow this tips & guides before you completely proceed to flashing your device. This tips are very important to be ignored.



Please Leave a comment after using this ROM
Report it you cannot download this file.


Any donation to support this site is highly appreciated!

Enter Amount (₦)



Click here to make donations using U$D